Component Solution Services REC02F Wartungshandbuch PDF herunterladen (Seite 82)

Ultraview 1030/1050 Monitors — Service Manual

4-18

Display or Touchscreen Assembly Replacement

Removing the Bezel

Figure 4-10: Bezel removal

Note:

The handle assembly may remain attached to the rear housing. Access holes are present in

the handle enclosure to gain access to the Front Bezel fastening screws.

1 Remove the expansion housing, if present.

2 Remove the four 6-32 × 1 1/4 inch screws from the top rear housing.

3 Remove the four 6-32 × 3/8 inch screws along the bottom rear housing.

Note:

Due to the short length of the inverter cable, remove it prior to fully opening the case.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 141 142

Keine Kommentare

Component Solution Services REC02F Wartungshandbuch Seite 82